- Hold down the Start/Reset button until three beeps are heard. Then press and hold the On/Off and Start/Reset buttons simultaneously until three beeps are heard.
In This Article...
What is the procedure for resetting my Hotpoint washer?
The following information relates to top-load washers with the Hydrowave wash technology. You can see if your washer model includes the Hydrowave wash system by looking at the specifications on our website. From 2011 through 2015, this capability was offered on a limited number of models.
You may need to reset your washer engine if it fills with water but does not agitate or spin. Because most modern washers do not have a transmission, the motor plays a larger part in the drive system. If your washer detects a power spike or surge, an imbalanced load, or a power outage, it may send a fault code to the motor, which may need resetting the motor.
Return the washer to its original position and elevate and lower the lid six times in a 12-second period.
To ensure that the magnetic connection on the lid is not disrupted, the lid must be elevated a minimum of 2″.
Set the washer to do a modest load of laundry without putting any clothing in it. You may add garments and complete the wash cycle if the washer fills and begins to agitate.
If the washer still won’t agitate or stops after a few loads, we recommend calling GE Appliances Factory Service to book a service appointment.
Is there a reset button on a Hotpoint washing machine?
It can be difficult to turn on your Hotpoint washing machine if the on/off or reset button has broken, dropped off, or worn out. Simply swap out the original button for this genuine replacement.
What is the procedure for resetting a Hotpoint?
How to Reset a Hotpoint Cooking Appliance
- Several times press the “Clear/Off” button until the clock appears on the LCD display.
- Wait 60 seconds after disconnecting the oven’s power source at the outlet or circuit breaker.
What is the procedure for resetting a washing machine?
Unplug your washing machine from the power outlet to reset it. Then, reconnect the washing cord to the wall. To send the reset signal to the system components, open and close the washing machine door six times.
On a Hotpoint Aquarius, where is the reset button?
If your appliance has a mechanism to protect it from overheating and catching fire, it can be reset. The reset button on your Hotpoint Aquarius tumble dryer will either be red with a reset logo that can be simply clicked to reset the appliance, or a small hole on one of the thermostats near the heater. If this is the case, you’ll need a pin to execute the reset.
Is there a way to reset a washing machine?
Most newer washing machines have a reset feature that allows you to restart the machine once an error code or problem has occurred. Power spikes, uneven loads, or a power outage are all possible causes of these issues. You can reset the motor on some machines by pressing a button. Unplugging the washer and then connecting it back in is a common way to reset a machine without a reset button. Programmable washing machines may contain a reset function or position to clear a program problem, albeit it is not commonly a button. Before handling the washer’s controls, power cable, or circuit breaker, make sure your hands are dry. Some washing machine issues may necessitate the assistance of a qualified specialist.
Why does the light on my Hotpoint washer keep flashing?
A number of indication lights flash on many of our newest Hotpoint washing machines to signal a probable issue. The following are the most common:
This code indicates that the Hotpoint washing machine is not filling properly. Check to see if your fill hoses are switched on properly. It’s also a good idea to inspect the fill hose tubing for any obstructions, leaks, or kinks.
This symbol indicates that the position of your program dial has been changed. The light will be restored to its previous status by simply restoring the wash dial to its original position.
Indicates that the wash load was deemed excessive or unbalanced by the Hotpoint washing machine. To address this, we recommend removing the garments, redistributing the load evenly, and retrying the spin cycle.
This symbol indicates that the Hotpoint washing machine is at the end of a wash cycle.
If the wash, rinse, and spin function lights all flash at the same time, there’s a chance your filter or waste / drain line is clogged.
Because all models differ, we recommend consulting your user manual you may also download your user manual instructions.
How do I turn off the demo mode on my Hotpoint washing machine?
How to disable demo mode. Alternatively, hold the buttons down until all of the LEDs light up, then release and hit start/cancel and on/off.
Why is the timer on my washing machine set to one minute?
For simple care and gentle cycles, it is typical for the washing machine to display a 1-minute break. An anti-crease cycle follows the wash cycle and lasts roughly 30 minutes. The display will indicate 1 minute, for example, and the OFF indicator light will illuminate during the remaining cycle.
What is the procedure for resetting my Hotpoint dishwasher?
If you hit the “Start/Reset” pad, the dishwasher will reset after 2 minutes. If the problem persists, you can try shutting off the dishwasher for 30 seconds to reset it. If electricity is restored, the dishwasher should work normally.
